1st SOLUTION
This solution involves milling the lower and upper edges of the slabs so that they can fit into horizontal aluminium struts (see detail). The solution includes vertical uprights positioned at a 100 cm centre-distance, on which the horizontal struts are fixed. The centre-distance of these latter is the same as the vertical dimension of the slab fixed.
2nd SOLUTION
IFor this second solution, the fastening anchors are inserted in a double slanting incision made on the back of the slabs, near the lower and upper edges. The number of fastening anchors required depends on the size of the slab and the loads on the façade, as calculated in the project. The slabs are supplied with the incisions already made, while they are assembled with the fastening anchors in the building site. The system requires vertical uprights with horizontal struts assembled between the uprights and anchors. The centre-distance of these struts equals the vertical dimension of the slabs.
| FILE NAME | FILE TYPE | FILE SIZE |
|---|---|---|
| solution1.pdf |  |
2.42 Mb |
| solution2.pdf | |
2.72 Mb |
